GR usoro GR135 GR165 GR180 GR215 moto grader
nkọwa ngwaahịa
Igwe na-akpụgharị ụwa nke na-eji scrapers mee ka ala dị larịị. A na-etinye scraper n'etiti axles n'ihu na azụ nke igwe ma nwee ike ibuli, tụgharịa, tụgharịa na ịgbatị. Omume a na-agbanwe agbanwe na nke ziri ezi, ọrụ ahụ dị mma, na ebe a na-edozi ọkwa ahụ nwere oke nkenke. Ọ dị mma maka ịrụ akwa okporo ụzọ na elu okporo ụzọ, wuo mkpọda n'akụkụ, igwu mmiri n'akụkụ, ịgwakọta ngwakọta okporo ụzọ, ikpochapụ snow, ịkwanye ihe ndị na-adịghị mma, na ịrụ ọrụ okporo ụzọ ala. Nlekọta okporo ụzọ gravel.
Ndị na-agụ moto bụ igwe bụ isi eji arụ ọrụ nhazi na nhazi ọkwa n'ọrụ ụwa, a na-ejikwa ya n'ọtụtụ ebe maka ọrụ nhazi ala dị ukwuu dịka okporo ụzọ na ọdụ ụgbọ elu. Ihe mere grader ji nwee ike ọrụ inyeaka dị iche iche bụ na scraper ya nwere ike mezue mmegharị ogo 6 na oghere. Enwere ike ịme ha n'otu n'otu ma ọ bụ na ngwakọta. Onye grader nwere ike inye ike zuru oke na nkwụsi ike maka subgrade n'oge nrụpụta subgrade. Ọ bụ akụrụngwa dị mkpa n'ịrụ ụlọ ọrụ nchekwa mba, iwu ogbunigwe, iwu okporo ụzọ, iwu nchekwa mmiri na ndozi ala ubi.
isi ihe nlereanya mmalite
GR100 102hp 7ton mini moto grader
Uru na isi ihe:
1. GR100 adopts ama Brand 4BTA3.9-C100-II (SO11847) turbocharged dizel engine na nnukwu mmepụta torque na ike idobere ọnụọgụ na ala mmanụ ụgbọala oriri.
2. Ihe ntụgharị ntụgharị nwere nnukwu ọnụọgụ ọnụọgụ, arụmọrụ dị elu, mpaghara dị oke mma, yana njirimara ọrụ nkwonkwo dị mma na engine.
3. The mbanye axle bụ a raara onwe ya nye XCMG axle.
| Ihe | GR100 |
| Ụdị njin | J-XZGR100-4BT3.9 |
| Enyere ike/ọsọ | 75(2400r/min) |
| N'ozuzu oke (ọkọlọtọ) | 6880*2375*3150mm |
| Mkpokọta ibu (ọkọlọtọ) | 7000kg |
| Nkọwa taya taya | 16/70-24 |
| Mwepu ala (axle n'ihu) | 550mm |
| zọọ ụkwụ | 1900mm |
| Oghere nke ihu na azụ axles | 4885 mm |
| Ọsọ n'ihu | 5,8,11,17,24,38km/h |
| Weghachi ọsọ ọsọ | 5,11,24km/h |
| Mgbalị traktị f=0.75 | 39.2N |
| Oke ọkwa ọkwa | 20% |
| Nrụgide mmụba nke taya | 300kPa |
| Usoro nrụgide na-arụ ọrụ | 16MPa |
135hp GR135 11ton moto grader
The GR135 moto grader bụ tumadi eji maka ala larịị, ditching, mkpọda scraping, bulldozing, scarification, snow mwepụ maka nnukwu ebe dị ka okporo ụzọ, ọdụ ụgbọ elu, ugbo-ala wdg. Owuwu okporo ụzọ mepere emepe na ime obodo na iwu nchekwa mmiri, ndozi ala ubi na ihe ndị ọzọ.
GR135 nakweere Dongfeng 6BT5.9-C130-II igwe dizel turbocharged, nnukwu ihe nrụpụta na ikike nchekwa ike na-arụkọ ọrụ ọnụ na obere mmanụ.
| Ihe | GR135 | ||
| Ntọala ntọala | Ụdị njin | 6BT5.9-C130-Ⅱ | |
| Enyere ike/ọsọ | 97(2200r/min) | ||
| N'ozuzu oke (ọkọlọtọ) | 8015*2380*3050mm | ||
| Mkpokọta ibu (ọkọlọtọ) | 11000kg | ||
| Nkọwa taya taya | 13.00-24 | ||
| Mwepu ala (axle n'ihu) | 515 mm | ||
| zọọ ụkwụ | 2020 mm | ||
| Oghere nke ihu na azụ axles | 5780 mm | ||
| Paragraf arụmọrụ | Ọsọ n'ihu | 5, 8, 13, 20, 30, 42km / h | |
| Weghachi ọsọ ọsọ | 5,13,30km / h | ||
| Mgbalị traktị f=0.75 | 61.3kN | ||
| Oke ọkwa ọkwa | 20% | ||
| Nrụgide mmụba nke taya | 300kPa | ||
| Usoro nrụgide na-arụ ọrụ | 16MPa | ||
| Nrụgide nnyefe | 1.3-1.8Mpa | ||
| Paramita arụ ọrụ | Okuku stei kacha nke wheel ihu | ± 49° | |
| Kachasị slant akụkụ nke n'ihu wheel | ±17° | ||
| Ogologo oscillating kacha elu nke axle ihu | ±15° | ||
| Oke oscillating igbe nke nha nhata | ±16° | ||
| Akụkụ steepụ kacha elu | ±27° | ||
| Obere ntụgharị ntụgharị kacha nta | 6.6m | ||
| Icha mma | Ogologo elu kacha elu | 410mm | |
| Omimi kacha elu | 515 mm | ||
| Akụkụ tilt kacha elu | 90° | ||
| Ịcha akụkụ | 54°-90° | ||
| Akụkụ nke mgbanwe | 360° | ||
| Ogologo & ogologo eriri | 3660*610mm | ||
GR165 165HP 15ton okporo ụzọ moto grader
Ejiri draịva azụ azụ axle nwere “NO-SPIN” na-enweghị ọdịiche mkpọchi onwe ya. Mgbe otu wiil na-adapụ, wiil nke ọzọ ka nwere ike ibunye ike mbụ ya.
breeki ọrụ bụ sistemu breeki hydraulic nke na-arụ ọrụ n'azụ ụkwụ abụọ nke grader ma dịkwa mma na ntụkwasị obi.
A na-eji ụgbọ mmiri ahụ emechiri emechi ahazi usoro ntụ oyi. Akụkụ dị n'ime ime bụ akụkụ dị nro na nke dị na plastik, nke na-egosipụta n'ụzọ zuru ezu mkpa nke ergonomics.
| Ihe | GR165 | ||
| Ntọala ntọala | Ụdị njin | 6BTA5.9-C180-Ⅱ | |
| Enyere ike/ọsọ | 130kW / 2200rpm | ||
| N'ozuzu oke (ọkọlọtọ) | 8900*2625*3470mm | ||
| Mkpokọta ibu (ọkọlọtọ) | 15000kg | ||
| Nkọwa taya taya | 17.5-25 | ||
| Mwepu ala (axle n'ihu) | 430mm | ||
| zọọ ụkwụ | 2156 mm | ||
| Oghere nke ihu na azụ axles | 6219 mm | ||
| Paragraf arụmọrụ | Ọsọ n'ihu | 5, 8, 11, 19, 23, 38km / h | |
| Weghachi ọsọ ọsọ | 5,11,23km / h | ||
| Mgbalị traktị f=0.75 | 77kN | ||
| Oke ọkwa ọkwa | 25% | ||
| Nrụgide mmụba nke taya | 260kpa | ||
| Usoro nrụgide na-arụ ọrụ | 16MPa | ||
| Nrụgide nnyefe | 1.3-1.8Mpa | ||
| Paramita arụ ọrụ | Okuku stei kacha nke wheel ihu | ±50° | |
| Kachasị slant akụkụ nke n'ihu wheel | ±17° | ||
| Ogologo oscillating kacha elu nke axle ihu | ±15° | ||
| Oke oscillating igbe nke nha nhata | ±15° | ||
| Akụkụ steepụ kacha elu | ±27° | ||
| Obere ntụgharị ntụgharị kacha nta | 7.3m | ||
| Icha mma | Ogologo elu kacha elu | 450mm | |
| Omimi kacha elu | 500mm | ||
| Akụkụ tilt kacha elu | 90° | ||
| Ịcha akụkụ | 28°-70° | ||
| Akụkụ nke mgbanwe | 360° | ||
| Ogologo & ogologo eriri | 3660*610mm | ||
GR180 190HP moto grader
1. Engine ika a ma ama, ZF Technology Gearbox, na XCMG Drive Axle na-eme ka usoro mbanye na-eme ka ike dakọtara na-enwe ezi uche na ntụkwasị obi.
2. Usoro okpukpu abụọ nke hydraulic breeki na-eme ka breeki bụrụ ihe a pụrụ ịdabere na ya ma kwụsie ike.
3. Na-eduzi usoro nleba anya ibu, ihe ndị bụ isi hydraulic na-enweta nkwado mba ụwa iji hụ na nkwụsi ike na ntụkwasị obi nke usoro ahụ.
4. Jiri XCMG pụrụ iche emelitere ọrụ ngwaọrụ.
5. The agụba ahụ adopts mgbanwe nnukwu chute na okpukpu abụọ slide usoro, na-arụ ọrụ agụba nakweere elu-ike na eyi-eguzogide ihe.
Nhọrọ 6.Various na-agbasawanye ọrụ igwe na arụ ọrụ.
| Ihe | GR180 | ||
| Ntọala ntọala | Ụdị njin | 6CTA8.3-C190-Ⅱ | |
| Enyere ike/ọsọ | 142kW / 2200rpm | ||
| N'ozuzu oke (ọkọlọtọ) | 8900x2625x3420 | ||
| Mkpokọta ibu (ọkọlọtọ) | 15400 n'arọ | ||
| Nkọwa taya taya | 17.5-25 | ||
| Mwepu ala (axle n'ihu) | 430mm | ||
| zọọ ụkwụ | 2156 mm | ||
| Oghere nke ihu na azụ axles | 6219 mm | ||
| Oghere nke etiti na wiil azụ | 1538 mm | ||
| Paragraf arụmọrụ | Ọsọ n'ihu | 5 ､8､11､19､23 38km/h | |
| Weghachi ọsọ ọsọ | 5 11 23 km / h | ||
| Mgbalị traktị f=0.75 | ≥79 kN | ||
| Oke ọkwa ọkwa | ≥25% | ||
| Nrụgide mmụba nke taya | 260kpa | ||
| Usoro nrụgide na-arụ ọrụ | 18MPa | ||
| Nrụgide nnyefe | 1.3-1.8Mpa | ||
| Paramita arụ ọrụ | Okuku stei kacha nke wheel ihu | ±50° | |
| Kachasị slant akụkụ nke n'ihu wheel | ±17° | ||
| Ogologo oscillating kacha elu nke axle ihu | ±15° | ||
| Oke oscillating igbe nke nha nhata | ±15° | ||
| Akụkụ steepụ kacha elu | ±27° | ||
| Obere ntụgharị ntụgharị kacha nta | 7.3m | ||
| Icha mma | Ogologo elu kacha elu | 450mm | |
| Omimi kacha elu | 500mm | ||
| Akụkụ tilt kacha elu | 90° | ||
| Ịcha akụkụ | 28°-70° | ||
| Akụkụ nke mgbanwe | 360° | ||
| Ogologo & ogologo eriri | 3965x610mm | ||
GR215 215HP moto grader
A na-eji GR215 eme ihe maka nhazi nnukwu ala, mmiri mmiri, mkpọda mkpọda, bulldozing, scarifying, iwepụ snow na ọrụ ndị ọzọ n'okporo ụzọ awara awara, ọdụ ụgbọ elu na ala ubi. Onye grader bụ igwe injinia dị mkpa maka owuwu nchekwa mba, owuwu ogbunigwe, iwu okporo ụzọ obodo na ime obodo, owuwu nchekwa mmiri na ndozi ala ugbo, wdg.
| Ihe | GR215 | ||
| Ntọala ntọala | Ụdị njin | 6CTA8.3-C215 | |
| Enyere ike/ọsọ | 160kW / 2200rpm | ||
| N'ozuzu oke (ọkọlọtọ) | 8970*2625*3420mm | ||
| Mkpokọta ibu (ọkọlọtọ) | 16500 n'arọ | ||
| Nkọwa taya taya | 17.5-25 | ||
| Mwepu ala (axle n'ihu) | 430mm | ||
| Oghere nke ihu na azụ axles | 6219 mm | ||
| Oghere nke etiti na wiil azụ | 1538 mm | ||
| Arụmọrụ parameters | Ọsọ n'ihu | 5,8,11,19,23,38km/h | |
| Weghachi ọsọ ọsọ | 5,11,23km/h | ||
| Mgbalị traktị f=0.75 | 87 kN | ||
| Oke ọkwa ọkwa | 20% | ||
| Nrụgide mmụba nke taya | 260kpa | ||
| Usoro nrụgide na-arụ ọrụ | 16MPa | ||
| Nrụgide nnyefe | 1.3-1.8Mpa | ||
| Paramita arụ ọrụ | Okuku stei kacha nke wheel ihu | ±50° | |
| Kachasị slant akụkụ nke n'ihu wheel | ±17° | ||
| Ogologo oscillating kacha elu nke axle ihu | ±15° | ||
| Oke oscillating igbe nke nha nhata | na-aga n'ihu15°, Azụ 15° | ||
| Akụkụ steepụ kacha elu | ±27° | ||
| Obere ntụgharị ntụgharị kacha nta | 7.3m | ||
| Icha mma | Ogologo elu kacha elu | 450mm | |
| Omimi kacha elu | 500mm | ||
| Akụkụ tilt kacha elu | 90° | ||
| Ịcha akụkụ | 28°-70° | ||
| Akụkụ nke mgbanwe | 360° | ||
| Ogologo & ogologo eriri | 4270*610mm | ||
Anyị na-enye XCMG moto graders, ụdị gụnyere GR100, GR135, GR165, GR180, GR215, GR230, GR260, GR2403, wdg.
Ọ bụrụ na ị ga-achọ ịmatakwu ụdị na nkọwa, biko kpọtụrụ anyị!
Ụlọ nkwakọba ihe1
Mkpọ na ụgbọ mmiri
- Mgbali elu ikuku
- Ụgbọ ala nke China
- Oyi Recycler
- Cone Crusher Liner
- Akpa akụkụ ebuli
- Dadi Bulldozer akụkụ
- Mgbakwunye Forklift Sweeper
- Akụkụ Hbxg Bulldozer
- Howo Engine Parts
- Hyundai Excavator Pump Hydraulic
- Akụkụ Komatsu Bulldozer
- Komatsu Excavator Gear Shaft
- Komatsu Pc300-7 Excavator Pump Hydraulic
- Akụkụ Liugong Bulldozer
- Akụkụ ihe nchekwa Sany Concrete Pump Spare Parts
- Akụkụ mapụtara Sany Excavator
- Akụkụ nke Shacman Engine
- Shantui Bulldozer Clutch Shaft
- Shantui Bulldozer Njikọ Shaft Pin
- Shantui Bulldozer Control Shaft na-agbanwe agbanwe
- Shantui Bulldozer Shaft na-agbanwe agbanwe
- Ngwa ihe ndozi nke Shantui Bulldozer
- Akụkụ Shantui Bulldozer
- Shantui Bulldozer Reel Shaft
- Shantui Bulldozer Reverse Gear Shaft
- Akụkụ nke Shantui Bulldozer
- Shantui Bulldozer Winch Drive Shaft
- Shantui Dozer Bolt
- Shantui Dozer Front Idler
- Ihe ndozi Shantui Dozer Tilt Cylinder Repair Kit
- Shantui Sd16 Bevel Gear
- Shantui Sd16 breeki lining
- Mgbakọ ọnụ ụzọ Shantui Sd16
- Shantui Sd16 O-Ring
- Shantui Sd16 Track Roller
- Shantui Sd22 na-ebu aka
- Shantui Sd22 esemokwu diski
- Shantui Sd32 Track Roller
- Akụkụ nke Sinotruk Engine
- Ụgbọ ala ụgbọ ala
- Akụkụ Xcmg Bulldozer
- Akụkụ mapụtara Xcmg Bulldozer
- Xcmg Mkpọchi Hydraulic
- Mbufe Xcmg
- Akụkụ Yuchai Engine
